Cane loader

Ford Cane Loader

Lifting height up to 5.80 meters, convenient to place the cane on ten wheels.

The structure is a single boom arm. This prevents the cane block from sticking while the cane is arranged up high. The structure is designed to be strong to be suitable for use in sugarcane fields. Few parts make it easy to use. and maintenance easy disassembly Can be used for tongs or other objects. because it has strong claws and has a lot of lifting power The upper frame can be changed from a tong to a bucket. It was developed for the convenience of growing sugar cane. Do not attach cane barricades on the side panels of ten wheels. The large and robust cylinder seal kit is designed to withstand heat. and has a long service life, suitable for heavy work, especially the structure designed to be strong to be suitable for use in sugarcane fields

Front Cane loader

Back Cane loader

Massey Cane Loader

hydraulic cylinder

Large hydraulic cylinder set, strong, lifting weight up to 1 ton.
High temperature resistant cylinder seal kit Therefore, it can be used for a long time.
The hydraulic equipment is new, especially ordered from Europe. which are designed by engineers produced by modern machines.
including computer lathes computer milling machine automatic welding machine, etc.

various hydraulic equipment

Imported raw materials from European countries such as hydraulic cylinders, hydraulic filters, hydraulic pumps, hydraulic controls. Hydraulic hoses and rubber balls

Appropriate tweezers

It is a type of tweezers that can turn the tweezers upside down to pick up the sugar cane.
transparent structure in order to shake off the soil easily
There is a small area to receive soil.

hydraulic control

There is a system to prevent shock when picking sugar cane. If there is a problem hitting a rock or sugarcane stump The system will cut off the oil.
The tongs will fold, making them unable to can continue to push when re-clipping The system will automatically resume normal operation.
The oil inlet and outlet are large, allowing the oil to be fed. The system has enough, the system is not hot.

hydraulic pump

It is suitable for the rotation of the engine power.
There is a system of joints that can be adapted. Reduce the leverage of the gear coupling to the pump. Extend the service life of the pump

oil tank system

has a large oil tank separated from the tractor's oil tank system
There is a two-stage filtration system. Can filter as fine as 10 microns

how to clean sugarcane

How to maintain the sugar cane loader

Before use, check to tighten all screws.
Apply grease at various joint points.
Check that the latch is in the ready position for no wear.
Check the hydraulic system for various leaks and oil in the hydraulic tank.
Test operation of all 3 hydraulic cylinders using low rpm engine initially. to allow hydraulic oil to reach every contact first This will reduce the wear and tear of the system.
Change hydraulic oil every 250 hours of use. or every time the hydraulic filter is replaced
Coarse filter replaced every 250 hours.
Fine filter changed when the needle on the filter dial exceeds 5 bar.